Grundig MV 100

General Manufacturer: Grundig

  • Model: MV 100
  • Years of manufacture:
  • Made in:
  • Color: Silver, Gold or Brown
  • Type: Analog
  • Remote control: No
  • Power consumption:
  • Dimensions: 270 x 60 x 230 mm (W x H x D).
  • Weight:
  • New price approx:


Connections

  • Number of inputs:
    • Phono DIN and RCA 2 mV /47 kiloOhm.

2x Tape DIN 150 mV /220 kiloOhm (1 on the front)

    • Tuner DIN 150 mV / 220 kiloOhm.
  • Number of outputs:
    • 2x Tape DIN (1 of which is on the front).
    • Headphones

2x loudspeaker DIN

Technical Data

  • Continuous power
    • LS1 or LS2 only:
      • 8 Ohm: 2 x 14 Watt sine wave
      • 4 Ohm: 2x 22.5 Watt sine wave
    • LS1 + LS2 at 8 Ohm:
      • 4 x 11.25 Watt sine wave
  • Dynamic power
    • LS1 or LS2 only:
      • 8 Ohm: 2 x 20 Watt
      • 4 Ohm: 2 x 40 Watt
    • LS1 + LS2 at 8 Ohm:
      • 4 x 20 Watt

Distortion factor (at nominal power):

    • =< 0.07% at 1 kHz
    • =< 0.25% for 40 Hz -20 kHz
  • Intermodulation (at rated power): =< 0,17%
  • Attenuation factor (4 ohms): 40
  • Frequency response:
    • TA 25 - 30 kHz - 3 dB, Tape, Tuner: 15 - 70 kHz -3 dB.
  • Power bandwidth: < 10 Hz . . . >100 kHz
  • Signal-to-noise ratio:
    • (effective/peak value according to DIN 45405) at nominal power.
      • Phono => 73/68 dB
      • Tuner, TB => 93/89 dB
    • referred to 2 x 50 mW at 4 Ohm
      • Phono => 67/63 dB
      • Tuner, TB => 69/64 dB
  • Stereo channel separation:
    • Tuner: => 82 dB

TB1: => 78 dB

    • TB2: => 82 dB
    • TA/Phono =>70 dB
  • Tone control:
    • Bass: +14/-15 dB at 40 Hz
    • Treble: +13/-13 at 16 kHz
  • Balance: -13/+2.5 dB
  • Loudness: Yes
  • High Filter: No
  • Low Filter (Subsonic): No
  • Mute: No
  • Direct/Line-Straight: No


Special Features

  • Power display by 2 LED chains</10>