Elac ESG-796 H 30

Data

General

  • Manufacturer: Elac, Kiel, Germany
  • Model: ESG 796 H 30
  • Years of manufacture: 1981 - 1986
  • Manufactured in: Germany
  • Colour: gold/black
  • Weight: 6,5 g
  • Original price: UVP 498 DM (Elac brochure 1984), for the MM anniversary 1987 248 DM


Technical data

  • Principle: MM
  • Frequency response: 10 - 30,000 Hz (+- 1db)
  • Channel separation: > 28 dB at 1 KHz
  • Channel balance: (1kHz) < 1,5 dB
  • Übersprechdämpfung: >28 db
  • Output voltage: 1.4 mV/cm/s
  • Terminating resistor: 47 KOhm
  • Induction:
  • Needle type: Van den Hul II 5/75 µm
  • Recommended contact force: 10 mN
  • Contact force range: 7.5 - 12.5 mN
  • Needle compliance: 30 µm/mN static
  • Recommended eff. tonearm mass: 7 - 14 g


Special equipment

  • here, if available

Remarks

  • Was installed by Revox in its turntables, see third link line.
  • Was also offered as a bundle with the Dual CS 741 Q from 1981 onwards.

Other models in the same series: Elac ESG-796 H 40

Test reports

Pictures

Elac 796 H 30.JPG

Reports

Links


</1,5>