B&W DM 10

From HifiWiki

Contents 1 Description 1.1 Product Summary 1.2 Technical highlights 1.3 Description 1.4 Drive Units 1.5 Frequency Response 1.6 Sensitivity 1.7 Nominal impedance 1.8 Power Handling 1.9 Dimensions 1.10 Finish

[edit] Description

[edit] Product Summary

• Manufacturer: B&W
• The DM10 addressed the noticeable trend towards smaller loudspeakers. But nearly all these so

called mini monitors suffer from inadequate bass performance, low sensitivity or poor power handling capability.

[edit] Technical highlights

• The unique B&W polymer bass/mid-range driver cone enables the DM10 to recreate realistic

sound pressure levels, even at low frequencies.

• Utilising B&W’s APOC overload-protection circuit, the DM10 can safely be used with even the

highest powered amplifiers.

[edit] Description

[edit] Drive Units

• 1 x 26mm polyester weave dome
• 26mm high temperature voice coil
• 1 x 160mm bass/midrange driver
• Bextrene cone with 26mm hightemperature voice coil

[edit] Frequency Response

• 75Hz to 20kHz ±3dB

[edit] Sensitivity

• 1 watt into 8 ohms for spl of 87dB at 1m sinewave input at 300Hz

[edit] Nominal impedance

• 8 ohms not falling below 6.4 ohm

[edit] Power Handling

• Suiteable for 10 to 75 watt rms amplifiers into 8 ohm

[edit] Dimensions

• Height: 485mm
• Width: 250mm
• Depth: 235mm

[edit] Finish

• Standard: walnut veneer, black

B&W DM-10 , from Bowers & Wilkins crossover circuit diagram for service & repair

$6.75

5d 20h 4m